Canon iPR C7010VP Series, Installation Manual

Page: 102 / 157

Chapter 2
2-57
F-2-256
2) Remove the lower feed roller 2 [1].
- Front side
- 1 screw [2]
- 1 bushing (w/leaf spring) [3]
- 1 E-ring [4]
- 1 bearing [5]
- Rear side
- 1 belt [6]
- 1 E-ring [7]
- 1 pulley [8]
- 2 dowel pins [9]
- 1 E-ring [10]
- 1 bearing [11]
F-2-257
3-3. Removing the lower feed roller 3
1) Remove the lower feed roller 3 [1].
- Front side
- 1 screw [2]
- 1 bushing (w/leaf spring) [3]
- 1 E-ring [4]
- 1 bearing [5]
- Rear side
- 1 belt [6]
- 1 E-ring [7]
- 1 pulley [8]
- 2 dowel pins [9]
- 1 E-ring [10]
- 1 bearing [11]
F-2-258
2.1.7.5 Left Deck Path Merger Unit (9 million prints)
0026-4822
imagePRESS C6010 / im agePRESS C7010VP / imagePRESS C60 10VP /
imagePRESS C7010VP FS / image PRESS C7010VP PSU / imagePRE SS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
1. Parts to replace
- Left deck merger roller (FC5-9539)
2. Before the replacement
1) Remove the Right Deck Un it. Refer to "Ch apter 8 Remo ving the Deck
Unit" in the Service Manual.
3. Replacement procedure
1) Detach the lower feed cover [1].
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
[2]
[1]
[5]
[4]
[3]
[2]
[11]
[10]
[9]
[8]
[7]
[1]
[6]
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
[5]
[4]
[3]
[2]
[11]
[10]
[9]
[8]
[7]
[1]
[6]