Canon IPF850 User Manual Download

Page: 578 / 694

Note

•

Push the Ink Tank Lock Lever down until it locks.

•

Make sure the Ink Tank Lock Lever does not return to the original position.

Hold the Ink Tank by the handle (a) and remove it. Press
the

button.

Important

•

If there is still ink in the Ink Tank you removed, store it in the box
with the ink holes (a) facing up. Otherwise, ink may leak and
cause stains.

Note

•

Dispose of used ink tanks according to local regulations.

Load the Ink Tank (330 ml)

Before opening the pouch, tilt the Ink Tank to the left and
right gently seven or eight times.

Important

•

Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.

•

If you do not agitate the Ink Tank, the ink may settle, which may affect printing quality.

Note

•

If the Ink Tank is cold, allow it to adjust to room temperature before attaching it to the printer.

Replacing Ink Tanks

iPF850

User's Guide

Maintenance and Consumables

Ink Tanks

578

Summary of Contents for IPF850























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IPF850

Reviews:

Related manuals for IPF850

Brands by name

Popular brands

Canon IPF850, User Manual

Search results

Summary of Contents for IPF850

Reviews:

Related manuals for IPF850

Brands by name

Popular brands