Canon IPF850 User Manual Download Page 539

Page: 539 / 694

Press

▲

▼

to select

Output Method

, and then press the

button.

Note

•

If a password has been set on the printer, the

Logon

screen is displayed.

To change the settings, select

Administrator

and press the

button. When the

Admin.Pswd

screen is

displayed, enter the password and press the

button to proceed to the next step.

If you select

User

and press the

button, you can check settings values but cannot change them.

Press

▲

▼

to select

Print

Print (Auto Del)

, or

Save: Box 01

Follow these steps only when you select

Save: Box 01

Press

▲

▼

to select the box, and then press the

button.

Specify

Print After Recv

To save print jobs on the hard disk before printing, specify

Print After Recv

Printing will start when

Print After Recv

is set to

, even if you have selected

Save: Box 01

Output Method

On the

Tab Selection screen

of the Control Panel, press

◀

▶

select the Settings/Adj. tab (

Note

•

If the

Tab Selection screen

is not displayed, press the

Menu

button.

Press the

button.

The

Set./Adj. Menu

is displayed.

Press

▲

▼

to select

System Setup

, and then press the

button.

Press

▲

▼

to select

Print After Recv

, and then press the

button.

Press

▲

▼

to select

Off

, and then press the

button.

Printing Without Saving Jobs in the Common Box

Jobs sent from a computer for which you have selected

Print

Output Method

(in Windows) or

Send job to

(in

Mac OS) in the printer driver are saved in the shared mailbox.

(See "

Using the Printer Hard Disk

.")

➔

P.519

When

Common Box Set.

Print (Auto Del)

in the Control Panel menu, print jobs for which you have selected

Print

in the

Output Method

dialog box of the printer driver are deleted from the shared mailbox after printing.

Use this function when printing highly confidential documents.

On the

Tab Selection screen

of the Control Panel, press

◀

▶

select the Settings/Adj. tab (

Note

•

If the

Tab Selection screen

is not displayed, press the

Menu

button.

Press the

button.

The

Set./Adj. Menu

is displayed.

iPF850

Printing Without Saving Jobs in the Common Box

User's Guide

Print Job Management

Advanced Print Job Operations

539

Summary of Contents for IPF850























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IPF850

Reviews:

Canon IPF850, User Manual, Page: 539 / 694

Search results

Summary of Contents for IPF850

Reviews: