Canon iPF830 Series, Basic Manual

Page: 123 / 146

Cause Corrective Action
When Detect Mismatch in the Control
Panel menu is set to Pause , the type of
paper loaded does not match the type
specified in the printer driver.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1.
Press ▲ or ▼ to select Change Paper , and then press the OK button.
2.
Replace the loaded paper with paper of the type and size you have specified in the
printer driver.
(See "Loading and Printing on Rolls.")
➔
User's Guide
(See "Loading and Printing on Sheets.")
➔
User's Guide
Press ▲ or ▼ to select Print , and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
The paper is too small.
The paper is too small.
Cause Corrective Action
When Detect Mismatch in the Control
Panel menu is set to Pause or Hold Job ,
paper smaller than the size specified in the
printer driver is loaded.
Press ▲ or ▼ to select Print , and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the print-
er as follows.
1.
Press ▲ or ▼ to select Stop Printing , and then press the OK button.
2.
Change the paper size setting in the printer driver to the size loaded in the printer
and try printing again.
Replace the loaded paper with paper of a size that matches the size setting in the
printer driver as follows.
1.
Press ▲ or ▼ to select Change Paper , and then press the OK button to stop
printing.
2.
Replace the loaded paper to match the settings in the printer driver and try printing
again.
(See "Loading and Printing on Rolls.")
➔
User's Guide
(See "Loading and Printing on Sheets.")
➔
User's Guide
When Detect Mismatch in the Control
Panel menu is set to Warning , paper small-
er than the size specified in the printer driv-
er is loaded.
You can continue to print, but note that this error may cause problems in the printing
results.
The paper is too small.
The paper is too small.
" Replace paper with A4/LTR (vertical) or larger "
Cause Corrective Action
The loaded paper is too small.
(When you have attempted to print a test
print sheet or other printer status informa-
tion.) Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper , press the OK button, and remove the paper.
(See "Removing Sheets.")
➔
P.23
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
➔
User's Guide
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press the OK button.
iPF830 Series The paper is too small.
Basic Guide
Error Message
Messages regarding paper
123