Canon iPF710 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 201 / 238

Chapter 7
7-10
7.1.3 Details of Service Mode
0013-7791
This section provides details of the Service mode menu.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.
When a roll media is used, the layout is optimized according to the media width.
2) SYSTEM
Displays the printer information shown below.
T-7-6
3) HEAD
Displays the following EEPROM information of the printhead.
T-7-7
4) INK
Displays the numbers of days passed since installation of the following ink tanks.
T-7-8
Display Description Unit
S/N Serial number of printer -
TYPE Type setting on main controller PCB
* iPF710/700 is represented by 36. -
LF TYPE Feed roller type: 0 or 1 -
TMP Ambient temperature degrees
C
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
mm
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
inch
SIZE CR Detected size of loaded media (carriage scan direction) mm
SIZE CR Detected size of loaded media (carriage scan direction) inch
Display Description
S/N Serial number of printhead
LOT Lot number of printhead
Display Description Unit
BK Number of days passed since the BK ink tank was installed Day(s
)