manualshive.com logo in svg

Canon iPF710 - imagePROGRAF Color Inkjet Printer, Service Manual

The Canon iPF710 - imagePROGRAF Color Inkjet Printer is a high-quality printing solution. Unlock its full potential by downloading the comprehensive User Manual, available for free at manualshive.com. This manual will guide you through setup, maintenance, and troubleshooting, ensuring optimal performance for your printing tasks.

Share
Download
background image

Chapter 4  

4-4

[3]Ink Tank Unit

See Disassembly/Reassembly > Tips on Disassembly/Reassembly > Ink Tank Unit.

F-4-4

4.3.4 External Covers

0012-6361

a. Upper cover

To detach the upper cover, detach damper cover [1] located on the left and right sides of the back each. Then,

fully open the upper cover and slide it to left.

F-4-5

[1]

[3]

[2]

[1]

Summary of Contents for iPF710 - imagePROGRAF Color Inkjet Printer















































































































































































































































Reviews:

No comments

Related manuals for iPF710 - imagePROGRAF Color Inkjet Printer

Brands by name

Popular brands

Load more brands