Canon iPF710 - imagePROGRAF Color Inkjet Printer Service Manual Download Page 121

Page: 121 / 238

Chapter 4

4-1

4.1 Service Parts

4.1.1 Service Parts

0012-6354

The service parts indicated below require careful handling.

1. Keep all packages with the warning not to turn over.

Pay careful attention to all individually packaged service part (carriage unit, purge unit, ink tank unit, and other

parts) boxes marked "This side up" and handle appropriately.

F-4-1

4.2 Disassembly/Reassembly

4.2.1 Disassembly/Reassembly

0012-6355

The general disassembly and assembly flows of the major components are shown below.

Summary of Contents for iPF710 - imagePROGRAF Color Inkjet Printer














































































































































































































































Search results

Summary of Contents for iPF710 - imagePROGRAF Color Inkjet Printer

Reviews:

Related manuals for iPF710 - imagePROGRAF Color Inkjet Printer

Brands by name

Popular brands

Canon iPF710 - imagePROGRAF Color Inkjet Printer, Service Manual

Search results

Summary of Contents for iPF710 - imagePROGRAF Color Inkjet Printer

Reviews:

Related manuals for iPF710 - imagePROGRAF Color Inkjet Printer

Brands by name

Popular brands