Canon iPF710 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 117 / 238

Chapter 3
3-4
3.1.2 Reinstalling the Printer
3.1.2.1 Reinstalling the Printer
0012-6353
1. Installing the printer on the same floor
If ink has not been drained from the printer when moving it to another place on the same floor, then an operation
check (Test Print) needs to be performed after the printer is moved to a new location.
2. Installing the printer on a different floor
If ink has been drained when transporting the printer to a different floor, follow the installation procedure below.
It is nearly identical to the procedure when installing for the first time.
1) Unpack the printer, and mount the printer on a stand if a stand is included.
2) Remove the cushioning materials and tape.
3) Reattach the maintenance cartridge.
4) Remove the belt stopper.
5) Connect the power cord.
6) Turn on the power and following the instruction in the message to install the ink tank. The ink is filled.
7) Load the media, and perform the operation check.