manualshive.com logo in svg

Canon IPF670, User Manual, Page: 536 / 652

Share
Download
Canon IPF670 User Manual Download Page 536

8

If you are printing on sheets smaller than A2 size for 

Auto(OtherPaper)

, a confirmation message is shown on

the Display Screen requesting you to continue printing.
Press the 

OK

 button and follow the instructions on the Display Screen.

Manual Banding Adjustment

Manual Banding Adjustment

If printed images are affected by banding in different colors, execute 

Adj. Quality

 for adjustment of the paper feed

amount.
Use 

Manual

 adjustment with highly transparent media or other paper for which 

Auto(GenuinePpr)

 or 

Auto(OtherPa-

per)

 cannot be used.

 (See "

Automatic Banding Adjustment

.")

➔

P.534

Manual

 adjustment requires you to enter an adjustment value after a test pattern is printed.

Note

•

Use paper of the same type and size for adjustment as you will use for printing.

•

Always check the 

Adj. Priority

 values before using 

Manual

 adjustment.

 (See "

Selecting a Feed Amount Adjustment Method

.")

➔

P.533

•

If additional fine-tuning is necessary after 

Manual

 adjustment, use 

Adj. Fine Feed

 (See "

Fine-Tuning the Paper Feed Amount

.")

➔

P.537

•

Use 

Adjust Length

 to ensure that lines in CAD drawings are printed at exactly the right length.

 (See "

Adjusting Line Length

.")

➔

P.538

Paper to Prepare

When Using Rolls

An unused roll at least 10 inches wide

When Using Sheets Two sheets of unused paper of at least A4/Letter size

Perform adjustment as follows.

1

Load the paper.

•

Attaching the Roll Holder to Rolls

➔

P.354

•

Loading Rolls in the Printer

➔

P.357

•

Loading Sheets in the Printer

➔

P.375

Important

•

Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be completed
correctly unless the loaded paper matches the settings.

2

 

On the 

Tab Selection screen

 of the Control Panel, press 

◀

 or 

▶

 to se-

lect the Settings/Adj. tab (

).

Note

•

If the 

Tab Selection screen

 is not displayed, press the 

Menu

 button.

3

Press the 

OK

 button.

The 

Set./Adj. Menu

 is displayed.

4

Press 

▲

 or 

▼

 to select 

Adjust Printer

, and then press the 

OK

 button.

5

Press 

▲

 or 

▼

 to select 

Feed Priority

, and then press the 

OK

 button.

 

Manual Banding Adjustment

                                                                                                                                                                                           

iPF670

                                                                                                                                                                                                                             

User's Guide

 

 

Adjustments for Better Print Quality

Adjusting the feed amount

 

536

Summary of Contents for IPF670













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments