Canon iPF5000 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 44 / 390

Chapter 1
1-28
[11] OK button
This button sets or executes the selected operation or value.
[12] Stop/Eject button
This button aborts the job in progress and ejects the media.
[13] Power button
This button turns on/off the printer.
[14] Color label
This label indicates the ink tank colors and names that correspond to the ink level indications shown on the display.
1.6.2 Operation Panel
0016-8908
iPF5100
This section explains the functions of the buttons and the meanings of the LEDs on the operation panel.
F-1-38
[1] Data lamp (green)
Flashing: When the printer is printing, this lamp indicates that the printer is receiving or processing a print job.
When the printer is not printing, this lamp indicates that the print job is paused or firmware data is being received.
Off: This indicates that there is no print job.
[2] Message lamp (orange)
On: This indicates that a warning message is displayed.
Flashing: This indicates that an error message is displayed.
Off: This indicates that the printer is normal or the power is turned off.
[3] Paper Tray lamp (green)
On: This indicates that the paper tray or thick paper feed slot is selected as the paper source.
Off: This indicates that the cassette or roll media is selected as the paper source.
[4] Auto Feed lamp (green)
On: This indicates that the cassette or roll media is selected as the paper source.
Off: This indicates that the paper tray or thick paper feed slot is selected as the paper source.
[5] Online button
This button switches between online and offline modes.
On: This indicates that the printer is in the online status.
Off: This indicates that the printer is in the offline mode.
[6] Paper Source button
This button is used to select a paper source. Pressing this button toggles between the automatic pickup and manual feed.
The [Auto Feed] lamp or [Paper Tray] lamp goes on.
[7] Menu button
This button displays the main menu of the printer.
[8] Information button
This button displays a submenu. Information about the ink and media each time you press this button.
Head cleaning is carried out when this button is held pressed for at least 3 seconds.
[9] buttons
(In the menu mode)
button: Displays the next higher-level menu.
button: Displays the next lower-level menu.
button: Displays the previous item or setting.
button: Displays the next item or setting.
(In the offline mode)
button: Feeds the roll media in the reverse direction.
button: Feeds the roll media in the normal direction.
[10] OK button
This button sets or executes the selected operation or value.
[11] Stop/Eject button
This button aborts the job in progress and ejects the media.
[12] Power button
This button turns on/off the printer.
[13] Color label
[1] [13] [14]
[2]
[5]
[6]
[7]
[8]
[9] [9] [10] [9]
[11]
[12]
[9]
[3] [4]