Canon iP110B Online Manual Download Page 109

Page: 109 / 427

Loading Plain Paper / Photo Paper

You can load plain paper or photo paper.

Important

• If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial

print, it can cause paper jams.

Note

• We recommend Canon genuine photo paper for printing photos.

For details on the Canon genuine paper, see

Media Types You Can Use

• You can use general copy paper.
• For the page size and paper weight you can use for this printer, see

Media Types You Can Use

• For loading envelopes, see

Loading Envelopes

1. Prepare paper.

Align the edges of paper. If paper is curled, flatten it.

Note

• Align the edges of paper neatly before loading. Loading paper without aligning the edges may

cause paper jams.

• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the

paper becomes completely flat.

For details on how to flatten curled paper, see "Load the paper after correcting its curl." in

Paper Is

Smudged/Printed Surface Is Scratched

2. Open the rear tray cover (A).

The paper output slot cover will open automatically.

3. Pull out the paper support (B) until the arrow ( ) mark is aligned with the arrow ( ) mark.

109

Summary of Contents for iP110B












































































































































































































































































































































































































































Search results

Summary of Contents for iP110B

Reviews:

Related manuals for iP110B

Brands by name

Popular brands

Canon iP110B, Online Manual

Search results

Summary of Contents for iP110B

Reviews:

Related manuals for iP110B

Brands by name

Popular brands