• Clearing of the message related to staple free stapling that is displayed when functions of Finisher are limited:
SORTER > FUNCTION > EMSG-CLR
Stack Delivery Operation
■ Outline
The paper in the processing tray is delivered in stacks using the assist guide and assist claw.
The assist guide supports the trailing edge of the paper stack, and the assist claw pushes out to eject the stack.
The assist guide's home position is detected by the assist HP sensor (PS7).
The assist guide and assist claw are moved to the stack delivery position by the rotating assist motor (M5).
They are returned to their home positions by the assist motor (M5) rotating in reverse.
Assist Motor (M5)
Assist HP Sensor
(PS7)
Assist Guide
Assist Claw
Assist Claw
Related error code
• E514-8001: Assist motor error
• E514-0002: Assist motor error
■ Divided Delivery
Normally in non-sort or shift-sort mode, paper aligned and shifted on the processing tray is divided every 2 sheets and delivered.
If the 3rd sheet is the last sheet, the last sheet is included to create a 3-sheet stack and delivered.
The following table shows the number of divided delivery sheets depending on the paper type, paper size, and paper weight.
In non-sort mode
Paper type
Paper weight
Paper size
Print mode
Number of divi-
ded delivery
sheets
Transparency, label,
postcard, 4-up post-
card, envelope, tracing
paper
-
-
1-sided/2-sided
1 sheet
Recycled 1/2/3, pre-
punched
-
Stack possible size
1-sided/2-sided
2 sheets*
-
Other than stack possible size
1-sided/2-sided
1 sheet
Other than above
More than 106 g/m
2
(Heavy 1)
-
1-sided/2-sided
2 sheets
Less than 106 g/m
2
(Heavy 1)
Paper length: 182.0 mm to 195.0 mm, or
Stack possible size more than 257.0 mm
1-sided/2-sided
2 sheets*
Other stack possible size
1-sided
2 sheets*
2-sided
5 sheets*
2. Technical Explanation
31
Summary of Contents for Inner Finisher-L1
