Canon Inner Finisher-J1, Service Manual

Page: 79 / 101

Overview
Adjustment and Functional Setting in Service Mode
■ Adjustment
For details, see the service manual for the host machine.
No Items Outline Use case
[1] Lv.1) SORTER> ADJUST> STP-2P Adjustment of 2-stapling position When the staples position in front/rear di-
rection is displaced in the 2-stapling mode
[2] Lv.1) SORTER> ADJUST> INSTP-F1 Adjustment of front 1-stapling posi-
tion When the staple position in front/rear direc-
tion is displaced in the front 1-stapling mode
[3] Lv.1) SORTER> ADJUST> INSTP-R1 Adjustment of rear 1-stapling position When the staple position in front/ rear direc-
tion is displaced in the rear 1-stapling mode
[4] Lv.1) SORTER> ADJUST> FR-ST-PS Adjust staple free pressure Upon user's request
[5] Lv.1) SORTER> ADJUST> FR-STP-X Adjustment of staple position for pa-
per feed direction in the staple free
stapling mode When the staple position in paper feed di-
rection is displaced in the staple free sta-
pling mode
[6] Lv.1) SORTER> ADJUST> FR-STP-Y Adjustment of staple position for front/
rear direction in the staple free sta-
pling mode When the staple position in front/rear direc-
tion is displaced in the staple free stapling
mode
[7] Lv.1) SORTER> ADJUST> RBLT-PRS Adjustment of return belt pressure When the paper alignment position is dis-
placed
[8] Lv.1) SORTER> ADJUST> MSTP-2P Adjustment of manual stapling posi-
tion When the staple position in front/rear direc-
tion is displaced in the manual stapling
mode
[9] Lv.1) SORTER> ADJUST> INF-ALG1 Adjustment of alignment position (A4) When the paper alignment position is dis-
placed
[10] Lv.1) SORTER> ADJUST> INF-ALG2 Adjustment of alignment position
(LTR) When the paper alignment position is dis-
placed
[11] Lv.1) SORTER> ADJUST> CENT-ALG Adjustment of center alignment
standard position • When the standard position for the cen-
ter alignment is misaligned
• When the paper alignment position is
displaced
[12] Lv.1) SORTER > ADJUST > PNCH-X Adjusting the punch hole position in
feed direction • When the punch hole is displaced in
feed direction
• This mode is available when the punch-
er unit has been installed
[13] Lv.1) SORTER > ADJUST > PNCH-Y Adjusting the punch hole position in
the horizontal registration direction • When the punch hole is misaligned in
the horizontal registration direction
• This mode is available when the punch-
er unit has been installed
■ Function Settings
For details, see the service manual for the host machine. However, see below for FIN-SP1.
No Items Outline Use case
[1] Lv.1) COPIER> OPTION> USER> TRY-STP To set whether to suspend delivery when
it is detected that the Finisher Tray is full.
Upon user's request
[2] Lv.1) SORTER> OPTION> MD-SPRTN To set whether to stop themachine when
an error occurs at Finisher. When preferring to run the machine al-
though an error occurs at Finisher
[3] Lv.1) SORTER> OPTION> MSTP-TMG To set the duration of time before exe-
cuting automatic stapling at manual sta-
ple mode Upon user's request
[4] Lv.1) SORTER> OPTION> FR-ST-PO To set the staple position of staple free
stapling Upon user's request
[5] Lv.1) SORTER> OPTION> FR-ST-SW To set the staple-free stapling without
staple cartridge Upon user's request
5. Adjustment
73