Canon Inner Finisher-H1, Service Manual

Page: 65 / 108

Main Unit
Removing the Upper Feed
Guide Unit
■ Preparation
1. Remove this machine from the host machine.
“Removing this Machine from the Host Machine” on
page 41
2. Remove the Front Cover Unit. “Removing the Front
Cover Unit” on page 55
3. Remove the Rear Cover. “Removing the Rear Cover”
on page 55
■ Procedure
CAUTION:
Be sure not to lose the Gear [1] and the Pin [2] when
disassembling/assembling.
[1]
[2]
1. Remove the Cable Guide [1].
• 2 Connectors [2]
• 1 Screw [3]
• 1 Claw [4]
[1]
[2]
[3]
[4] [4]
2x 1x
2. Remove the 1 Clip [1] and 1 Bushing [2].
[1]
[2]
3. Remove the Upper Feed Guide Unit [1].
• 2 Screws [2]
[2]
[1]
2x
4. Parts Replacement and Cleaning
59