Canon imgaePRESS 1110+ Customer Expectation Document Download

Page: 45 / 75

Version 3

imagePRESS 1110+ Customer Expectations Document

Page 45

Perfect Binder-C1 Table Continued

Item

Specifications

Glue Capacity

Approximately 0.8 lb (380 g) (Enough for approximately 135 booklets
containing 100 bound sheets of 20 lb bond (80 g/m

) paper)

Tray Capacity

10 books containing 100 body pages (17 lb bond (64 g/m

) and one cover

sheet (32 lb bond (128 g/m

))

(Equivalent to 5” (127 mm) high, or a total of 1,000 sheets of paper)

Warm Up Time

Fewer than 7.3 minutes

Power Source/Maximum
Power Consumption

208 V AC, 60 Hz, 2.6 A
623 W maximum

Dimensions (H x W x D)

51 1/4 " x 36 3/8" x 31 1/8" (1,300 mm x 922 mm x 791 mm)

Weight

Approximately 674 lb (306 kg)

*4 These values are for reference purposes only. They may differ from the actual values.
*5 These values do not include the size of the port and power cord on the back of the perfect binder.

6.14 Booklet Trimmer-D1

The optional Booklet Trimmer-D1 provides front trimming of saddle stitched
bookbinding jobs.

Item

Specifications

Description

Upper knife reciprocating, fore-edge trimmer with delivery tray

Trim Amount

0.08” to 0.78” (2 mm to 20 mm)

Trim Thickness

100 sheets (20 lb bond (80 g/m

))

98 sheets (20 lb bond (80 g/m

)) + 2 sheets (110 lb cover (300 g/m

))

Delivery Tray Capacity

Conveyor belt - 30 booklets
(or 40 sheets of an LTR booklet (20 lb bond (80 g/m

))

Booklet Waste Tray
Capacity

Approximately 1,500 sheets of trimmed strips (LTR (20 lb bond (80 g/m

trim width 0.78” (20 mm))

Acceptable Paper Sizes

13” x 19.2”, 12” x 18”, 12 5/8” x 17 3/4”, 11” x 17”, LGL, LTRR

Acceptable Paper
Weights

Weight: Plain:

14 lb bond to 110 lb cover (52 to 300 g/m²)

Coated: 24 lb bond to 90 lb cover (80 to 240 g/m²)

Power Source/Maximum
Power Consumption

From the finisher.
300 W maximum

Dimensions (H x W x D)/

41" x 62" x 30 3/8" (1,040 mm x 1,575 mm x 770 mm)
(including conveyor belt and delivery tray)

Weight

Approximately 335 lb (152 kg)

Summary of Contents for imgaePRESS 1110+












































































Search results

Summary of Contents for imgaePRESS 1110+

Reviews:

Related manuals for imgaePRESS 1110+

Brands by name

Popular brands

Canon imgaePRESS 1110+, Customer Expectation Document

Search results

Summary of Contents for imgaePRESS 1110+

Reviews:

Related manuals for imgaePRESS 1110+

Brands by name

Popular brands