manualshive.com logo in svg

Canon imageRUNNER C3480, Sending And Facsimile Manual Sending And Facsimile Manual, Page: 70 / 476

Share
Download
Canon imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual Download Page 70

Specifying Destinations Using the New Address Tab

2-2

2

Basic Sending 

Methods

Specifying Destinations Using the New Address Tab

You must specify the destination (such as a fax number, e-mail address, I-fax 
address, or file server address) to send documents. This section describes the 
procedure for specifying destination that has not been stored in the Address Book.

IMPORTANT

 

The destination that you just specified is not stored in the Address Book. It is deleted 
once the document is sent.

NOTE

 

•

If you frequently send documents to the same destinations, store these destinations in 
the Address Book beforehand. (See "Storing New Addresses," on p. 10-5.)

•

A maximum of 64 new addresses and addresses obtained via a server (User Inboxes are 
not included in this count) can be specified at the same time.

•

You can specify e-mail addresses, I-fax addresses, file server addresses, and a User 
Inbox.

•

If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed, you 
can specify fax numbers in addition to the above mentioned destinations.

•

To view the detailed information of a selected destination, select the destination 

➞

 press 

[Details].

•

You can change, edit, or erase destinations on the Send Basic Features screen before 
scanning. (See "Checking/Changing a Destination," on p. 2-35, or "Erasing a 
Destination," on p. 2-37.)

 

Specifying a Fax Number

You can specify a new fax number using   -   (numeric keys),  , and  . You can 
also specify several numbers in succession, and send the original to several 
destinations in a single operation (Sequential Broadcast).

1

Press [New Address] 

➞

 [Fax].

NOTE

 

If no destination is displayed on the Send Basic Features screen, pressing 

 - 

 

(numeric keys), 

, or 

 without pressing [Fax] on the New Address tab, displays 

the screen shown in step 2, which enables you to enter the fax number.

Summary of Contents for imageRUNNER C3480





























































































































































































































































































































































































































































































Reviews:

No comments