Canon imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual Download Page 439

Page: 439 / 476

Report and List Samples

14-9

Appen

dix

■

USAGE T

The time taken (in minutes and seconds) to receive the document from start to finish is
printed.

■

PGS.

The number of pages that were received is printed.

■

RESULT

If the documents were received successfully, "OK" is printed.

If a reception error occurred, "NG" (No Good) is printed.

If a reception error occurred, the page number in which the error occurred, and the error
code number are printed.

Confidential Fax Inbox RX Report

This report enables you to confirm that documents were received in a Confidential
Fax Inbox.

You can set whether to automatically print a Confidential Fax Inbox RX Report.
(See "Confidential Fax Inbox RX Report," on p. 12-10.)

NOTE

This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.

■

INBOX NO./NAME

The number (00 to 49) and user assigned name of the Confidential Fax Inbox in which the
documents were received is printed.

■

JOB NO.

The four digit number, that is automatically assigned when the document is accepted for
receiving, is printed.

12/11/2007 TUE 13:53 FAX 012XXXXXXX

INBOX NO./NAME
JOB NO.
DESTINATION ADDRESS
PSWD/SUBADDRESS
DESTINATION ID
ST. TIME
USAGE T
PGS.
RESULT

#01/BOX01
5006
098XXXXXXX

Canon
12/11 13:53
00’14
1
OK

001

**********************************************

CONFIDENTIAL FAX INBOX RX REPORT

iR C3480i

***

Summary of Contents for imageRUNNER C3480





























































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands

Canon imageRUNNER C3480, Sending And Facsimile Manual Sending And Facsimile Manual

Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands