manualshive.com logo in svg

Canon imageRUNNER C3480, Sending And Facsimile Manual Sending And Facsimile Manual, Page: 433 / 476

Share
Download
Canon imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual Download Page 433

Report and List Samples

14-3

14

Appen

dix

■

DESTINATION ID

The name of the recipient is printed.

■

JOB NO.

The four digit number, that is automatically assigned when the document is accepted for 
sending, is printed.

■

MODE

The type and mode of transmission are printed.

■

PGS.

The number of pages that were sent is printed.

NOTE

 

If a field exceeds its display capacity, only those characters that fit in the display are 
printed.

 

Send TX Report/Send Error TX Report

The Send TX Report is a printed report that informs you of whether a send job has 
been successfully delivered to its destination. A Send TX Report can be set to print 
automatically after each job is sent, or only when there are transmission errors. 
(See "Send TX Report," on p. 12-4.)

Transmission type:

Send (TX)

Mode of transmission: FTP, SMB, IPX, WebDAV, User Inbox (BOX), I-Fax (I-FAX), E-mail 

(MAIL), Fax (FAX)

0 1 0 8

1 2 3 4  

1 2 / 1 1   1 5 : 3 0

1

- - - - -

t o m

B O X   0 1

f i l e   s h a r e

project

12/11/2007 TUE 15:30

i R  C3480i

J O B   N O .

D E P T .   I D

S T .   T I M E

P G S .

S E N D   D O C U M E N T   N A M E

T X / R X   I N C O M P L E T E

T R A N S A C T I O N   O K

E R R O R

TX REPORT

t o m @ e x a m p l e . c o m

s t a r f i s h . o r g a n i z a t i o n . c o m

\\s w a n \s h a r e

001

.

***

***

*****************

*****************

Summary of Contents for imageRUNNER C3480





























































































































































































































































































































































































































































































Reviews:

No comments