manualshive.com logo in svg

Canon imageRUNNER C3480, Sending And Facsimile Manual Sending And Facsimile Manual, Page: 217 / 476

Share
Download
Canon imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual Download Page 217

Checking/Changing the Status of Send Jobs

8-3

8

Che

c

ki

ng/Cha

ngin

g th

e Se

nd/Rece

iv

e Sta

tu

s

2

Press [Send] 

➞

 [Status] or [Log].

3

Select a job whose detailed information you want to check 

➞

 

press [Details].

IMPORTANT

 

You cannot check the status of fax jobs sent with the Direct Sending or Manual 
Sending mode, or sent from computers via the fax driver because the statuses of 
those jobs are not displayed. To check their statuses, see the Send Job Status 
screen for Fax.

NOTE

 

•

If Erase Failed TX in TX Settings under <Common Settings> in Communications 
Settings (from the Additional Functions screen) is set to 'Off' when multiple 
destinations are selected for a send job, <Finished.> is displayed for those 
destinations to which the job was sent successfully, and <Error> is displayed for 
those destinations that had transmission errors. When multiple destinations are 
simultaneously specified for a send job, and you select and cancel the transmission 
to any one of those destinations, or the retransmission of an error job or an 
interrupted job is completed successfully, information on all of those simultaneously 
specified destinations is displayed in the log.

•

If you send documents using the Full mode to a machine that does not support the 
Full mode, delivery confirmation cannot be carried out. In this case, the job 
concerned is not considered as complete even though the actual sending of the 
document is successful. Such jobs are displayed as <Waiting for result...> on the 
Status screen until the time set for <Full Mode TX Timeout> in I-Fax Settings in 
Communications Settings in System Settings (from the Additional Functions 
screen) has lapsed. After the timeout, the job is moved to the log, and the result is 
shown as <-> when sending of the document to a server or other destination could 
not be verified.

Summary of Contents for imageRUNNER C3480





























































































































































































































































































































































































































































































Reviews:

No comments