Canon imageRUNNER C3025i User Manual Download Page 94

Page: 94 / 814

Configuring E-Mail/I-Fax Communication Settings

19YU-01S

Use the Remote UI to configure the detailed send and receive settings, such as the settings for using the machine to

send and receive I-Faxes and the settings for POP authentication and encryption of communication before you send e-

mail or I-Faxes. Contact your provider or network administrator for the required settings.

●

For more information about the basic operations to be performed when setting the machine from the
Remote UI, see Setting Up Menu Options from Remote UI(P. 434) .

Start the Remote UI and log in to System Manager Mode. Starting Remote
UI(P. 427)

Click [Settings/Registration] on the Portal page. Remote UI Screen(P. 428)

Select [TX Settings] [Network Settings - E-Mail/I-Fax Settings].

Click [Edit].

Specify the required settings.

[SMTP Server]

Enter alphanumeric characters as the SMTP server name (or IP address) for sending e-mail and I-Faxes.

[E-Mail Address]

Enter alphanumeric characters for the e-mail address that you want to use for the machine.

[POP Server]

Enter alphanumeric characters as the SMTP server name or IP address for sending e-mail and I-Faxes.

[User Name]

Enter alphanumeric characters as the user name for the specified e-mail account when a POP3 server is used.

[Set/Change Password]

To set or change the password when a POP3 server is used, select the check box and enter alphanumeric

characters in [Password].

Setting Up

Summary of Contents for imageRUNNER C3025i















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER C3025i

Reviews:

Related manuals for imageRUNNER C3025i

Brands by name

Popular brands

Canon imageRUNNER C3025i, User Manual

Search results

Summary of Contents for imageRUNNER C3025i

Reviews:

Related manuals for imageRUNNER C3025i

Brands by name

Popular brands