Canon imageRUNNER C3025i, User Manual

Page: 629 / 814

● Enter a plus value to increase the density, or a minus value to decrease the density.
9
Press <Apply>.
10
Press <Output Test Page> <Start Printing>.
➠
A test page after correction is output.
11
If there is no problem with the test page, press <Apply>.
Scanner Correction
You can perform density correction by scanning a test page that you have output. This saves the labor of performing
density measurements and entering density values.
1
Select <Menu> in the Home screen. Home Screen(P. 116)
2
Select <Adjustment/Maintenance> <Adjust Image Quality>.
3
Select <Correct Shading> <Scanner Correction>.
4
Confirm the procedure, and select <Next>.
5
Check that the size and type of paper displayed on the screen is loaded in the
machine, and select <Start>.
➠
A test page is printed.
6
Place the test page on the platen glass.
● Place the test page sheet in the machine in a manner that its side on which the four color stripes are printed
faces down and the cyan stripe faces toward the back side of the machine.
7
Close the feeder and press <Start Scanning>.
➠
The test page is scanned and density correction is performed.
Maintenance
620