Canon imageRUNNER C3025i, User Manual

Page: 509 / 814

<Menu> <Function Settings> <Printer> <Printer Settings> <Print
Quality> <Resolution> Select <1200 dpi> or <600 dpi>
<Special Smoothing Mode>
Specify the mode to print data with a smooth finish. If the quality of the printout is not acceptable in <Mode
1> (default), try another mode.
<Mode 1>
<Mode 2>
<Mode 3>
<Mode 4>
<Mode 5>
<Mode 6>
<Menu> <Function Settings> <Printer> <Printer Settings> <Print Quality> <Special
Smoothing Mode> Select a mode
<Mode 1>
Prints an outline of dark text or a figure with a smooth finish. This is the optimal mode for various types of
printing.
<Mode 2>
Prints figure outline and internal halftones with a smooth finish.
<Mode 3>
Prints dark text or lines on an area with a colored background with a smooth finish.
<Mode 4>
Prints an image such as a photo or an outline of a figure or text with a smooth finish.
<Mode 5>
Prints an image and halftones with an even balance.
<Mode 6>
Prints the entire image with a smooth finish.
● When <Error Diffusion> is set to <On> in <Halftones>, printing in modes other than <Mode 5> all produces
the same results.
● This setting is only available when <Resolution> is set to <600 dpi>.
Setting Menu List
500