Canon imageRUNNER C3025i, User Manual

Page: 481 / 814

<10BASE-T>
<100BASE-TX>
<1000BASE-T>
<On>
● When <Communication Mode> is set to <Half Duplex>, you cannot select <1000BASE-T>.
<MAC Address>
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MAC Address for Wired LAN(P. 36)
<Use IEEE 802.1X>
*1*2
Enable or disable IEEE 802.1X authentication. Configuring IEEE 802.1X Authentication Settings(P. 406)
<Off>
<On>
<Menu> <Preferences> <Network> <Use IEEE 802.1X> Select <Off> or <On> Restart the
machine
<Firewall Settings>
Without appropriate security, unauthorized third parties can access computers and other communication devices that
are connected to a network. To reduce the risk of this unauthorized access, configure the settings for packet filtering, a
feature that restricts communication to devices with specified IP addresses or MAC addresses.
<IPv4 Address Filter>
Enable or disable settings for filtering packets sent to or received from devices with specified IPv4 addresses.
Specifying IP Addresses for Firewall Settings(P. 379)
<Outbound Filter>
<Off>
<On>
<Inbound Filter>
<Off>
<On>
<Menu> <Preferences> <Network> <Firewall Settings> <IPv4 Address Filter> Select
<Off> or <On> in <Outbound Filter> or <Inbound Filter> <Apply> Restart the machine
Setting Menu List
472