manualshive.com logo in svg

Canon ImageRunner C2550, Reference Manual

Share
Download
Canon ImageRunner C2550 Reference Manual Download Page 20

Installation Location and Handling

1-2

1

Be

fo

re 

Y

o

u

 Star

t Usin

g 

Th

is Mach

ine

Installation Location and Handling

This section describes precautions for installation location and handling. We 
recommend that you read this section prior to using this machine.

 

Installation Precautions

Avoid Installing the Machine in the Following Locations

■

Avoid locations subject to temperature and humidity extremes, whether 
low or high.

For example, avoid installing the machine near water faucets, hot water heaters, 
humidifiers, air conditioners, heaters, or stoves.

■

Avoid installing the machine in direct sunlight.

If this is unavoidable, use curtains to shade the machine. Be sure that the curtains do not 
block the machine's ventilation slots or louvers, or interfere with the electrical cord or 
power supply.

Summary of Contents for ImageRunner C2550

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands