manualshive.com logo in svg

Canon ImageRunner C2550, Reference Manual, Page: 16 / 512

Share
Download
Canon ImageRunner C2550 Reference Manual Download Page 16

xiv

Thank you for purchasing the Canon Color imageRUNNER C3480/C3480i/C3080/C3080i/
C2550. Please read this manual thoroughly before operating the machine to familiarize 
yourself with its capabilities, and to make the most of its many functions. After reading this 
manual, store it in a safe place for future reference.

 

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, restrictions, 
handling precautions, and instructions that should be observed for safety.

WARNING

.

Indicates a warning concerning operations that may lead to death or 
injury to persons if not performed correctly. To use the machine safely, 
always pay attention to these warnings.

CAUTION

.

Indicates a caution concerning operations that may lead to injury to 
persons, or damage to property if not performed correctly. To use the 
machine safely, always pay attention to these cautions.

IMPORTANT

.

Indicates operational requirements and restrictions. Be sure to read 
these items carefully to operate the machine correctly, and avoid 
damage to the machine.

NOTE

.

Indicates a clarification of an operation, or contains additional 
explanations for a procedure. Reading these notes is highly 
recommended.

Preface

How To Use This Manual

Summary of Contents for ImageRunner C2550

































































































































































































































































































































































































































































































































Reviews:

No comments