Canon imageRUNNER C1325 Series, Service Manual

Page: 308 / 607

4
4
4-158
4-158
Disassembly/Assembly > Pickup/Feed System > Removing the Registration/Pickup Unit > Procedure
Disassembly/Assembly > Pickup/Feed System > Removing the Registration/Pickup Unit > Procedure
Removing the Registration/Pickup Unit
■ Preparation
1) Remove the Rear Cover 1(Refer to page 4-34).
2) Remove the Right Rear Cover/Right Rear Lower Cover(Refer to page 4-38).
3) Remove the Right Cover Unit(Refer to page 4-41).
4) Remove the Front Cover(Refer to page 4-33).
5) Remove the Right Front Cover(Refer to page 4-37).
6) Remove the Waste Toner Container(Refer to page 4-108).
7) Remove the Registration Drive Unit(Refer to page 4-123).
■ Procedure
CAUTION:
• Be sure not to touch the surface [A] of the roller when disassembling/assembling.
[A]
[A] [A]
F-4-415
F-4-414
CAUTION:
• If the Registration Roller [2] and the Pre-registration Roller [1] are replaced
separately, not simultaneously, it may generate a difference in feeding speed and
cause feeding problems such as geometrical characteristics and jams.
[1]
[2]
F-4-416