Canon imageRUNNER C1325 Series, Service Manual

Page: 281 / 607

4
4
4-131
4-131
Disassembly/Assembly > Image Formation System > Removing the Bottle Drive Unit (Y/M/C/Bk) > Procedure
Disassembly/Assembly > Image Formation System > Removing the Bottle Drive Unit (Y/M/C/Bk) > Procedure
Removing the Bottle Drive Unit (Y/M/C/Bk)
■ Preparation
1) Remove the Rear Cover 1(Refer to page 4-34).
2) Remove the Fax Unit (to be removed for models equipped with a fax)(Refer to page 4-101).
3) Remove the Main Controller Unit(Refer to page 4-81).
4) Remove the Low-voltage Power Supply PCB Unit(Refer to page 4-93).
5) Remove the DC Controller PCB Unit(Refer to page 4-86).
6) Remove the Delivery Tray(Refer to page 4-45).
7) Remove the Toner Container (Y/M/C/Bk) (remove the toner container of the color to be
removed)(Refer to page 4-109).
■ Procedure
NOTE:
In this procedure, the procedures for the Bottle Drive Unit (C Bk) are described.
Perform the same procedure for removing the Bottle Drive Unit (Y M).
F-4-328 F-4-329
1) Free the Harness [1].
• Harness Guide [A]
1x
[1] [A]
2) Remove the Bottle Drive Unit (C Bk) [1].
• 1 Connector [2]
• 4 Screws [3]
• 2 Bosses [4]
[2] [3]
[3]
[3]
[3] [4]
[4]
4x
1x
[1]
F-4-330
F-4-331