Canon imageRUNNER C1030, Service Manual

Page: 21 / 42

Chapter 2
2-3
2.2.2 Support the NTLMv2 certification
0025-9521
When You perform SMB transmission, with the folder under the Windows domain management, You manage either following authentic method.
Because it is certified by ID and a password, a user does not have to be conscious of which authentic method you login.
The NTLMv2 certification came to support it than this model.
- The plaintext certification
- The NTLMv1 certification
- The NTLMv2 certification
Note:
When You login in user ID registered with a domain, You input ID into a user name.
When You login in user ID registered with another domain, You appoint a user name in "domain name \ user name".
2.2.3 IEEE802.1X Settings
0025-9522
For IEEE802.1X, the RADIUS server requires user authentication from the supplicant (machine) when connecting to a network.
Authentication information is managed collectively with the RADIUS (Remote Authentication Dial In User Service) server, and then the supplicant is authenticated.
Invalid access can be prevented because this authentication method permits only supplicants authenticated by the RADIUS server to connect to the network via an
authenticator. The authenticator blocks communication from supplicants not authenticated by the RADIUS server.
From this model, setting was enabled on RUI.
F-2-1
IEEE802.1X Authentication Problems and Remedies
T-2-4
#0816 You have reached the quota for the number of pages you can scan for
faxing. Reset or increase the page quota or contact your system administrator.
#0821 You have received data that cannot be processed (TIFF analysis
error). Check the settings, and then ask the sender to resend the data.
The read job failed because TIFF or JPEG files were not supported or
the image data was corrupted.
Confirm that the supported file format is used, and then read data
again.
Error message Cause Remedy
IEEE802.1X error. Set the correct cert.
information. The correct client authentication information (the key pair
and certificate, user name and password, and the CA
certificate) is not set. Confirm the set authentication method and authentication
information (the key pair and certificate, user name and
password, and CA certificate).
IEEE802.1X error. Change the
password. The password has expired. Set a new password.
IEEE802.1X error. Check
authentication settings. The specified authentication method of the machine does not
match the authentication method of the RADIUS server. Confirm whether the authentication method specified for the
machine and the authentication method specified for the
RADIUS server match, and specify the correct
authentication method if necessary.
IEEE802.1X error. The certificate has
expired. The server certificate sent from the RADIUS server has
expired. Confirm the expiration date for the server certificate of the
RADIUS server.
Cord Description Action