Canon imageRUNNER ADVANCE C9075S PRO, Operating Information Manual, Page: 201 / 456

Copy your documents
Make a copy
Introduction
A basic copy is a copy for which you only define a few settings before touching the Start
button , such as:
• 1-sided or 2-sided
• A staple
• The number of copies required.
Before you begin
• Remove staples or paper clips.
• Make sure that the originals in the automatic document feeder have the same size.
• Make sure that the automatic document feeder does not contain more than 100 sheets
(80 g/m² or 20 lb bond).
• Make sure that the originals are not curled.
How to make a basic copy
1.
Place the originals face up into the ADF, or place 1 original face down on the glass plate.
2.
Touch 'Jobs' -> 'Copy/Scan' -> 'Copy job'.
3.
If required, define the settings and the required number of copies.
4.
Select 'Scheduled jobs' in the 'Destination' field to start copying immediately.
5.
Press .
The job is added to the list of 'Scheduled jobs'.
Chapter 7 - Copy jobs 201
Make a copy