Canon imageRUNNER ADVANCE C9075S PRO, Operating Information Manual, Page: 19 / 456

The paper module
Introduction
The optional paper module (Multi-Drawer Paper Deck-A1) provides three additional
paper trays. You can load up to 2000 sheets of paper (80 g/m
2
/ 20 lb bond) per tray.
#
IMPORTANT
• If the printer is in Sleep mode, you may not be able to open the paper trays, even
when pressing the Open buttons. In this case, press the Sleep Mode key on the
operator panel to reactivate the printer, then press the Open button on the paper
tray you want to open.
• To detect when multiple papers are fed with Multi-Drawer Paper Deck-A1, Paper
Deck Double Feeding Detection Kit-A1 is required.
• If Multi-Drawer Paper Deck-A1 is attached, the special feeder cannot be used.
#
NOTE
The following paper sizes can load into Multi-Drawer Paper Deck-A1:
- 330 × 483 mm
- 320 × 450 mm (SRA3)
- 305 × 457 mm
- A3, B4, A4, A4R, B5, B5R, and A5R
- Custom size (139.7 × 182.0 mm to 330.2 × 487.7 mm)
- 13" × 19"
- 12 5/8" × 17 11/16"
- 12" × 18"
- 11" × 17"
- LGL, LTR, LTRR, STMTR, EXEC
- Custom size (5½" × 7 1/8" to 13" × 19 1/4")
Chapter 2 - Main parts 19
The paper module