manualshive.com logo in svg

Canon imageRUNNER ADVANCE C7260, Basic Operation Manual

Share
Download
Canon imageRUNNER ADVANCE C7260 Basic Operation Manual Download Page 185

185

Tr

oubleshooting

 

 

    Buff er Pass Unit-J1  

 If a paper jam occurs inside the Buff er Pass Unit-J1, a screen prompting you to remove the jammed paper appears on the touch 
panel display. Check the location of the paper jam, and follow the procedure described below, while referring to the directions 
that appear on the touch panel display, to remove the jammed paper. 
  

    

1

Close the cover that is open.

When closing the cover, be careful not to get your fi ngers caught, as this may result in personal 
injury.

2

Open the front cover of the Buff er Pass Unit-J1.

3

Open the lower guide and upper guide of the Buff er Pass Unit-J1.

1  Open the lower guide.
2  Open the upper guide.

Summary of Contents for imageRUNNER ADVANCE C7260













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands