manualshive.com logo in svg

Canon imagerunner advance C5550i, User Manual, Page: 971 / 1556

Share
Download
Canon imagerunner advance C5550i User Manual Download Page 971

◼

#080

A subaddress is not set in the device of the other party.

●

Check the subaddress of the other party, and try sending again.

◼

#081

A password is not set in the device of the other party.

●

Check the password of the other party, and try sending again.

◼

#082

Polling transmission is not configured in the device of the other party.

●

Tell the other party to configure polling transmission, and perform polling reception again.

◼

#083

The subaddress and password of the machine and the device of the other party did not match when

performing polling reception.

●

Check that the subaddress and password of the machine and the device of the other party match, and try
sending again.

◼

#084

Cannot perform polling reception because the password is not supported by the device of the other

party.

●

Perform polling reception without using a password.

◼

#099

The operation was canceled before it was complete.

●

Perform the operation again.

An error occurred because the power of the machine was turned OFF while it was operating.

●

Check whether the power is turned ON, and perform the operation again, if necessary.

Turning ON the Machine(P. 90)

◼

#102

The subaddress and password do not match.

●

Check the subaddress and password of the other party, and try sending again.

◼

#701

The Department ID does not exist, or the PIN was changed.

Troubleshooting

959

Summary of Contents for imagerunner advance C5550i





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments