manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5535i III, User Manual

Share
Download
Canon imageRUNNER ADVANCE C5535i III User Manual Download Page 1324

◼

#010

Paper has run out.

●

Load paper.

Loading Paper(P. 116) 

◼

#011

The document to send was not placed correctly.

●

Place the original correctly and try sending again from the start of the procedure.

◼

#012

Could not send because the device of the other party does not have any paper.

●

Tell the other party to load paper.

◼

#018

There was no response when redialing.

●

Check that the other party can communicate, and redial again.

Could not send because the other party was making a call, etc.

●

Check that the other party can communicate, and try sending again.

Could not send because the settings of the device of the other party do not match.

●

Check the settings of the other party, and try sending again.

◼

#019

When sending a fax from a remote fax client machine, sending could not be performed because the

memory of the remote fax server machine became full.

●

Try sending again after the other sending to the remote fax server machine is complete.

●

Delete  unnecessary  documents  and  error  documents  from  the  remote  fax  server  machine  to  free  up
space.

The document could not be sent because the memory of the machine is full.

●

Delete unnecessary documents and documents with errors to make more memory available.

When performing memory sending, the image could not be stored in the memory.

●

Perform memory sending again.

●

Send the document with direct sending.

There was a problem with the scanned image when performing direct sending.

●

Perform direct sending again.

◼

#022

Forwarding could not be performed because the content of the group destination specified as the

forwarding destination was deleted or only included a Mail Box.

Troubleshooting

1310

Summary of Contents for imageRUNNER ADVANCE C5535i III














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands