Canon imageRUNNER ADVANCE C5500 Series, Service Manual, Page: 913 / 1331

OPTION
■ FNC-SW
COPIER > OPTION > FNC-SW
MODEL-SZ 1 Fixed magnifictn & DADF orgnl dtct size
Detail To set the fixed magnification ratio display and the original detection size with DADF.
It is set automatically at the time of installation of the Reader according to the location.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 3
0: AB configuration (6R5E) for Japan, 1: Inch configuration (5R4E) for North/Middle/South
America, 2: A configuration (3R3E) for Europe, 3: AB/Inch configuration (6R5E) for Asia, Oceania,
South America
Default Value It differs according to the location.
SCANSLCT 2 ON/OFF of scan area calculate function
Detail To set ON/OFF of the function to calculate scanning area from the specified paper size.
When the paper size is larger than the original size, selecting ON reduces productivity because
the scanning area gets larger.
Use Case
When matching the scanning area with the paper size
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: OFF (calculated from the detected original size)
1: ON (calculated from the specified paper size)
Default Value 0
DH-SW 2 For R&D
SENS-CNF 2 Setting of original detection size
Detail To set original detection size according to AB configuration/Inch configuration.
Set 0 for AB configuration machine, and set 1 for Inch configuration machine.
Use Case
When replacing the Reader Controller PCB/clearing RAM data
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: AB configuration, 1: Inch configuration
Default Value
0
8. Service Mode
899