manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 254 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 254

2

2

2-216

2-216

Technology > Embedded RDS > Error code and strings

Technology > Embedded RDS > Error code and strings

No.14
Q: Some part of information seems to be suppressed as screens passes: Settings/ 

Registration > Preferences > Network > TCP/ IP Settings, when the device is connected 
with a PS server unit. How the authentication information such as CA certificate is dealt?

A: The certificate-related items are displayed. Even when the device is connected with a PS 
Server Unit, E-RDS functions.

No.15
Q: Counter information could not be sent at the scheduled send time due to the power of this 

machine being turned OFF. Will the counter information be sent later when the power of 
this machine is turned ON?

A: Yes. When a scheduled send such as that for counter could not be executed due to the 
power of this machine being turned OFF, etc., and the scheduled send time has already 
passed at power-on, the send is executed immediately.

The following shows data send according to the status of this machine.

Send types

Status of this machine

Power ON

Power OFF

Sleep

Scheduled send

Sent

Not sent

*1

Sent

*2

Immediate send

(Service call log / Alarm log / Jam log)

Sent

-

Sent

*2

*1: Immediately sent if the send time has already passed at power-on.
*2: Sent after recovery from sleep mode.

T-2-101

Error code and strings

The following error information is output in the communication error log details display screen.

(Here, "server" means UGW.)

•  The error information are displayed in the following form.

[*] [Error strings] [Method name] [Error details provided by UGW]

NOTE:

“*” is added to the top of the error text in the case of an error in communication test 

(method name: getConfiguration or communicationTest) only.

No.

Code

Error strings

Cause

Remedy

1

0000 0000 SUSPEND: mode 

changed.

Unmatched Operation Mode Initialize the E-RDS setting 

(ERDS-DAT).

2

0500 0003 SUSPEND: 

Communication test 

is not performed.

Rebooting the device while 

the communication test had 

not been performed although 

E-RDS is enabled.

Perform a communication test 

(COM-TEST).

3

0xxx 0003 Server schedule is 

not exist

Blank schedule data have 

been received from UGW.

Perform and complete a 

communication test (COM-

TEST).

4

0xxx 0003 Communication test 

is not performed

Communication test has not 

completed.

Perform and complete a 

communication test (COM-

TEST).

5

84xx 0003 E-RDS switch is 

setted OFF

A communication test has 

been attempted with the 

E-RDS switch being OFF.

Set E-RDS switch (E-RDS) 

to 1, and then perform a 

communication test (COM-

TEST).

6

8600 0002

8600 0003

8600 0101

8600 0201

8600 0305

8600 0306

8600 0401

8600 0403

8600 0414

8600 0415

Event Registration 

is Failed

Processing (event processing) 

within the device has failed.

Turn the device OFF/ ON. 

If the error persists, replace 

the device system software. 

(Upgrade)

7

8700 0306 SRAM version 

unmatch!

Improper value is written 

in at the head of the Main 

Controller PCB 2 SRAM 

domain of E-RDS.

Turn the device OFF/ ON.

8

8700 0306 SRAM AeRDS 

version unmatch!

Improper value is written 

in at the head of the Main 

Controller PCB 2 SRAM 

domain of Ae-RDS.

Turn the device OFF/ ON.

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments