manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 187 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 187

2

2

2-149

2-149

Technology > MEAP > Enhanced System Application Management > SSO-H (Single Sign-On-H) overview

Technology > MEAP > Enhanced System Application Management > SSO-H (Single Sign-On-H) overview

Enhanced System Application Management

 

■

Outline

[ Enhanced System Application Management ] mainly manages the login services for logging 
in to devices.
•  Installing and uninstalling Enhanced System Application Management (login services, etc.)
•  Switching login services (switching the method to log in to devices)
•  Checking installation status of other System Applications

F-2-234

 

■

About Login Service

The login service is started up to authenticate the user when MEAP-enabled iR device is 
booted up. Login service changes and install/ uninstall are carried out from the [ System 
Management ] page.
The preinstalled login applications are Default Authentication and Single Sign On-H, and 
Default Authentication is enabled by default.

CAUTION:
•  This device does not support SDL, conventional SSO and Security Agent.

 

■

Default Authentication overview

This login service is selected when the department ID management is enabled or no 
authentication function is set. Set the department ID management to [ON] on Setting / 
Registration (Additional Functions mode) of this device and register 7-digit ID and PIN by 
department. This setting restricts the use of this device only to users keying the registered 
ID and PIN. Department IDs/ and PINs can be registered on the touch panel of this device or 
Remote UI.

 

■

SSO-H (Single Sign-On-H) overview

This is a merger of the existing SDL and SSO login services and has the following features.
•  The following three authentication methods may be selected from.

•  Server authentication
•  Server authentication and local authentication
•  Local device authentication

•  Active Directory or LDAP can be used as the server for server authentication.
•  It is not necessary to prepare a server for Security Agent (SA). (In the case of SSO, SA is 

necessary.)

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments