9
9
9-348
9-348
Installation > [TYPE-11] > Execution of Auto Adjust Gradation
Installation > [TYPE-11] > Execution of Auto Adjust Gradation
Reporting to the System Administrator at the End of the
Work
When you have completed all installation work, report to the system administrator for the
following:
At the point when installation is completed, make explanations about how to check that
the appropriate security function has been added and enabled so that, when the function
becomes uncontrolled, the system administrator can immediately detect the problem and
request <servicing work when a failure occurs>.
Completion of the Installation Work:
Ask the system administrator to make sure that '2.00' or '2.01' is indicated for ‘Canon MFP
Security Chip’ as the version information of the security chip by referring to the description
of Checking the Security Version.
Maintenance of the Security Functions:
Ask the system administrator to check the security mark to make sure that the security
functions are maintained each time the machine is started up by referring to the description
of Checking the Security Mark.
Execution of Auto Adjust Gradation
When this product is installed, the machine initializes its HDD, resetting the data used for
auto gradation adjustment.
Therefore be sure to execute auto gradation adjustment (full adjust) after installing this kit.