2
2
2-91
2-91
Technology > Fixing System > Service work > When replacing parts
Technology > Fixing System > Service work > When replacing parts
Service work
■
Periodically replaced parts
No parts are assigned to be replaced periodically.
■
Consumable parts
Parts name
Parts
number
Qty
Estimated life
(print)
Counter
(DRBL-2)
Adjustment
Remarks
1 Film unit
FM3-5949
1
300,000
FX-UP-FR N.A. *
1
100V
FM3-5950
120V
FM3-5951
230V
2 Pressure roller
FC8-4906
1
300,000
FX-LW-RL N.A. *
1
3 Fixing bearing
XG9-0172
2
300,000
FX-LW-BR N.A.
The parts mentioned above are in common with those of iR-ADV C5051 series.
*1: Be sure to check if nip width is appropriate after replacement.
Pressure Roller
Bearing
Bearing
Film Unit (100V)
(120V)
(230V)
T-2-54
F-2-123
■
List of periodical service works
Parts name
Parts
number
Qty
Estimated
life (print)
Remarks
1 Fixing Separation Cuide FC8-4906
1
300,000 Replace the Film Unit at the same time
2 Shutter Cover
XG9-0172
1
300,000 Replace the Film Unit at the same time
■
When replacing parts
When replacing the Consumable Parts, be sure to clear the
Parts Counter
(COPIER > COUNTER > PRDC-1/DRBL-1)
●
Film unit, pressure roller
Check that the fixing nip width is within the specified range.
Paper to be used: A4 / LTR size (plain paper, 80 to 105 g/m
2
)
1) Set paper on the manual feed pickup tray.
2) Execute output of fixing nip paper in Service Mode:
(Lv.1) COPIER > FUNCTION > FIXING > NIP-CHK
Paper is picked up to make 2-sided print.
1
st
side: solid image in Magenta, 2
nd
side: no image (blank)
The paper is stopped at the nip area when fixing is performed on the 2
nd
side, and then
delivered outside the machine approx. 15 sec later.
3) Measure the nip width and check that the measured value is within the specified range.
T-2-55