2
2
2-84
2-84
Technology > Fixing System > Controls > Standby temperature control
Technology > Fixing System > Controls > Standby temperature control
Controls
■
Fixing temperature control: overview
Command for
flying start
Command for
print start
Flying start
control
temperature
Startup
(warm-up
rotation)
control
temperature
During-print
control
temperature
Sheet-t
o-sheet
control
temperature
Fixing
temperature
Time
STBY
INTR
PRNT
●
Standby temperature control
To preheat the fixing assembly to reduce time for starting print
• Flying start temperature control
●
Print temperature control
To increase temperature to meet the fixing target temperature and keep the target
temperature during printing
• Startup (warm-up rotation) temperature control
• Print temperature control
• Sheet-to-sheet temperature control
●
Down sequence control
To prevent fixing failure due to rising temperature at the edge or fall in temperature.
This control causes reduced through-put.
• Down sequence when feeding small size paper
• Down sequence when switching paper size
F-2-117
■
Standby temperature control
Flaying start
control
temperature
Time
15 sec
PRNT
STBY
INTR
Fixing
temperature
Command for
flying start
●
Flying start temperature control
Purpose:
to reduce print time (FPOT) of the 1
st
sheet
Starting conditions:
• When pressing the numeric key on the control panel
• When pressing the button / key on the touch panel
• When opening / closing the cassette
• At recovery from sleep mode to standby mode
Control description:
Temperature rises to a certain point (150 degrees Centigrade: Main Thermistor 2).
This operation takes for 15 seconds after the last operation.
F-2-118