9
9
9-96
9-96
Installation > Voice Guidance Kit-F2 > Operation Check > To stop the use
Installation > Voice Guidance Kit-F2 > Operation Check > To stop the use
24)
Pass the Speaker Cable through the hole of the Right Rear Cover 1, and close the
cover.
25)
Pass the Speaker Cable to Cord Guide, and install the 3 Cord Guide covers.
F-9-250
F-9-251
Checking after installation
NOTE:
When changing the settings upon user’s request, it is required to log in as a system
manager in accordance with instructions from the user administrator.
1) Connect the power plug of the host machine to the power outlet.
2) Open the switch cover and turn ON the main power switch.
3) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > and
make sure that [Use Voice Navigation] is [ON].
4) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > and
make sure that [Voice Guide from Speakers] is displayed.
Operation Check
■
During use
1) Press reset key 3 secs or more.
2) Press [Main Menu] in Control Panel.
3) If the display in panel screen is boxed with red frame, “Voice Guidance Kit” is available.
If “Voice Guidance Kit” doesn’t properly operate, check the below.
Enter Service Mode (Level 1) > COPIER > DISPLAY > VERSION, and check whether
languages to be used for TTS-JA/TTS-EN/TTS-IT/TTS-FR/TTS-DE are properly installed.
■
To stop the use
1) Press the Reset Key for 3 secs or more.