manualshive.com logo in svg

Canon IMAGERUNNER ADVANCE C5051, User Manual, Page: 41 / 152

Share
Download
Canon IMAGERUNNER ADVANCE C5051 User Manual Download Page 41

Staple Finisher-C1/Booklet Finisher-C1/External 2/3 Hole Puncher-B1 (Optional)

1-29

1

Routine Maintenance

Staple Finisher-C1/Booklet Finisher-C1/External 2/3 Hole 

Puncher-B1 (Optional)

This section describes the procedure for replacing the staple cartridge in the Staple Finisher-C1 or Booklet Finisher-C1, and how to 

remove the punch waste from the External 2/3 Hole Puncher-B1.

Replacing the Staple Cartridge in the Stapler Unit

When the Staple Finisher-C1 or Booklet Finisher-C1 is almost out of staples, and the staple cartridge in the stapler unit must 
be replaced, a screen prompting you to replace the staple cartridge appears on the touch panel display. Follow the procedure 
described below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine.

We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.

1

  Open the front cover of the finisher .

 

 

 

 

Staple Finisher-C1

Booklet Finisher-C1

2

  Pull out the staple case, holding it by the green tab .

 

 

 

 

Summary of Contents for IMAGERUNNER ADVANCE C5051

























































































































































Reviews:

No comments