Canon IMAGERUNNER ADVANCE C5030, Service Manual, Page: 986 / 1455

9
9
9-19
9-19
Installation■>■Installation■Procedure■>■Setting■the■Environment■Heater■Switch
Installation■>■Installation■Procedure■>■Setting■the■Environment■Heater■Switch
Setting■the■Environment■Heater■Switch
CAUTION:
•■ In■case■that■the■setting■environment■is■high■humidity■environment■(*),■turn■on■the■Environment■Heater■Switch.
•■ When■the■temperature■and■humidity■of■the■installation■environment■are■high,■image■smear■is■likely■to■occur.
*■This■is■the■case■that■the■value■of■the■absolute■water■volume■outside■of■the■machine■is■about■12g■or■more.■Service■Mode■>■COPIER■>■DISPLAY■>■ANALOG■>■ABS-HUM
In■case■the■Environment■Heater■Switch■Cover■is■included■in■the■package,■turn
the■Environment■Heater■Switch■ON■and■then■install■the■Environment■Heater■Switch■Cover.
1） Remove■the■Environment■Heater■Switch■Cover.
CAUTION:
When■removing■the■cover,■do■not■insert■
a■screwdriver■in■the■oval■hole.
F-9-36
2)■Turn■ON■the■Environment■Heater■Switch.
F-9-37
3)■Install■the■Environment■Heater■Switch■Cover.