8
8
8-256
8-256
Service Mode > FEEDER > ADJUST
Service Mode > FEEDER > ADJUST
ADJUST
FEEDER > ADJUST
DOCST
Adj of DADF img lead edge margin: front
Lv.1 Details
To adjust the margin at the leading edge of the image for DADF
scanning.
Execute when the output image after DADF installation is displaced.
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
As the value is incremented by 1, the margin at the leading edge
of the image is decreased by 0.1 mm. (The image moves in the
direction of the leading edge of the sheet.)
Use case
- When installing DADF
- When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-50 to 50
Unit
0.1 mm
Default value
0
LA-SPEED
Fine adj of DADF image magnifictn: front
Lv.1 Details
To adjust the image magnification ratio in vertical scanning direction
for DADF scanning.
As the value is incremented by 1, the image is reduced by 0.1 % in
vertical scanning direction. (The feeding speed increases, and the
image is reduced.)
Use case
- When installing DADF
- When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-30 to 30
Unit
0.10%
Default value
0
DOCST2
Adj of DADF img lead edge margin: back
Lv.1 Details
To adjust the margin at the leading edge of the image for DADF
scanning.
Execute when the output image after DADF installation is displaced.
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
As the value is incremented by 1, the margin at the leading edge
of the image is decreased by 0.1 mm. (The image moves in the
direction of the leading edge of the sheet.)
Use case
- When installing DADF
- When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-50 to 50
Unit
0.1 mm
Default value
0
FEEDER > ADJUST
LA-SPD2
Fine adj of DADF image magnifictn: back
Lv.1 Details
To adjust the image magnification ratio in vertical scanning direction
for DADF scanning.
As the value is incremented by 1, the image is reduced by 0.01 % in
vertical scanning direction. (The feeding speed increases, and the
image is reduced.)
Use case
- When installing DADF
- When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-200 to 200
Unit
0.01%
Default value
0
ADJMSCN1
Zoom adj in 2-sided horz scan way: front
Lv.1 Details
To make a fine adjustment of the front side image magnification ratio
in horizontal scanning direction at the time of DADF duplex scanning.
As the value is incremented by 1, the image is reduced by 0.1 % in
horizontal scanning direction.
Use case
When a displacement occurs to the front/back side image
magnification ratio at the time of duplex scanning
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-10 to 10
Unit
0.10%
Default value
0
ADJMSCN2
Zoom adj in 2-sided horz scan way: back
Lv.1 Details
To make a fine adjustment of the back side image magnification ratio
in horizontal scanning direction at the time of DADF duplex scanning.
As the value is incremented by 1, the image is reduced by 0.1 % in
horizontal scanning direction.
Use case
When a displacement occurs to the front/back side image
magnification ratio at the time of duplex scanning
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-10 to 10
Unit
0.10%
Default value
0