Canon IMAGERUNNER ADVANCE C5030, Service Manual, Page: 382 / 1455

4
4
4-116
4-116
Parts Replacement and Cleaning > Image Formation System > Reinstalling the Drum Unit > Procedure
Parts Replacement and Cleaning > Image Formation System > Reinstalling the Drum Unit > Procedure
Reinstalling the Drum Unit
■ Preparations
1) Open the Front Cover.
2) Open the Right Lower Cover and Right Upper Cover.
3) Remove the ITB Cover.
4) Pull out the Process Unit.
5) Remove the Drum Unit.
■
Procedure
CAUTION:
Do not touch the drum surface.
1) Hold the grip and install it from the top vertically.
Grips
F-4-182
CAUTION:
When installing it at an angle, the shutter may be damaged. Thus, make sure to install it
from directly above.
F-4-183
.
2) Align the guide of Process Unit with the guide of Drum Unit and install the Drum Unit.
Guide of
drum unit
Guide of
process unit
Guide of process unit
Guide of
drum unit
CAUTION:
Since the rail may be broken, make sure that the shutter is surely slid on the rail.
Shutter
Rail
Shutter
Rail
F-4-185
F-4-184