Canon IMAGERUNNER ADVANCE C5030, Service Manual, Page: 338 / 1455

4
4
4-72
4-72
Parts Replacement and Cleaning > Main Controller > Opening the Controller Box > Procedure
Parts Replacement and Cleaning > Main Controller > Opening the Controller Box > Procedure
Opening the Controller Box
■ Preparations
1) Open the Right Lower Cover and Right Upper Cover.
2) Remove the Right Rear Cover.
3) Remove the Left Rear Cover and the Left Rear Sub Cover.
4) Remove the Rear Cover.
• 2 rubber caps
• 2 screws
• 1 claw
x2
Rubber caps
Rear cover
Claw
F-4-62
■
Procedure
1) When the Reader is installed, remove the reader power cable.
• 2 connectors
• 2 wire saddles
• 1 cable guide
x2
x2
Connectors
Reader power cable
Cable guide
Wire saddles
NOTE:
• If the Fax Unit is not installed, refer to step 2-1).
• If the Fax Unit is installed, refer to step 2-2).
2-1) Avoid the harness and open the Controller Box.
• 2 screws
x2
F-4-63
F-4-64