2
2
2-160
2-160
Technology■>■MEAP■>■Collection■of■MEAP■Console■Logs■>■Work■Procedure
Technology■>■MEAP■>■Collection■of■MEAP■Console■Logs■>■Work■Procedure
4)■Press■the■0■key■on■the■control■panel■keypad■to■change■the■setting■to■'0';■then,■click■[■OK■]■
button.
5)■Check■that■the■notation■‘MPSF’■has■appeared■in■the■upper■left■corner■of■the■screen;■then,■
restart■the■device.
F-2-245
F-2-246
Collection■of■MEAP■Console■Logs
■
■
Overview
When■debugging■a■MEAP■application,■console■logs■need■to■be■collected■in■some■cases.
The■following■shows■how■to■collect■MEAP■console■logs■using■commercially■available■terminal■
software■and■service■mode.
■
●
What■to■Prepare
•■ PC■connected■with■the■same■network■as■the■device
•■ Commercially■available■terminal■software
Note:
In■the■procedure■shown■in■this■manual,■"Tera■Term■Pro"■and■"Hyper■Terminal"■are■used■
as■the■terminal■software.
■
■
Work■Procedure
■
●
Device■Setting■Procedure
1)■■Start■[■SERVICE■MODE■]■in■Level■1.
2)■Press■[■COPIER■]■>■[■Option■]■>■[■DSPLY-SW■]■buttons.
F-2-247