9
9
9-423
9-423
Installation■>■Installation■Procedure■>■Installing■the■Serial■Interface■KIT-K2
Installation■>■Installation■Procedure■>■Installing■the■Serial■Interface■KIT-K2
Installing■the■Serial■Interface■KIT-K2
1)■Remove■the■Face■Cover■from■the■Main■Controller■PCB■1.■(Removed■Face■Cover■is■not■
used.)
•■ 2■Screws■
(Removed■screws■
are■not■used.)
■
x2
F-9-852
2)■Clean■the■affixing■side■(Controller■Box■Frame)■with■lint-free■paper■moistened■with■alcohol.
3)■Affix■the■IA■Harness■Protection■Sheet■to■the■Main■Controller■PCB■1.
NOTE:■
•■ Because■the■working■space■is■limited,■use■scale,■etc.■for■cleaning.
•■ After■affixing■the■I■Harness■Protection■Sheet,■be■sure■to■press■it■with■scale,■etc.■to■prevent■coming■off.
F-9-853
4)■Remove■the■1■screw■and■install■the■PCB■Spacer.■(Removed■screw■is■used■in■the■procedure■6))
F-9-854