9
9
9-206
9-206
Installation■>■[TYPE-4]■Standard■HDD■+■Option■HDD■(80GB)■+■HDD■Mirroring■Kit■or■HDD■Data■Encryption■&■Mirroring■Kit■>■Checking■the■Security■Mark■(Only■when■installing■HDD■Data■Encryption■&■Mirroring■Kit)
Installation■>■[TYPE-4]■Standard■HDD■+■Option■HDD■(80GB)■+■HDD■Mirroring■Kit■or■HDD■Data■Encryption■&■Mirroring■Kit■>■Checking■the■Security■Mark■(Only■when■installing■HDD■Data■Encryption■&■Mirroring■Kit)
Installing■the■System■Software■Using■the■SST■(Only■
when■installing■HDD■Data■Encryption■&■Mirroring■Kit)
The■system■data■stored■on■the■HDD■and■used■to■control■the■host■machine■will■be■lost■when■
the■machine■is■first■started■up■after■installing■this■product.
It■is■important■to■install■the■system■software■used■to■control■the■host■machine■so■that■the■
machine■may■start■up■properly■after■installation■of■this■product.
Details■follow.
1.■Requirements
1)■PC
Service■support■tool■in■the■version■that■supports■this■host■machine■must■be■installed.
2)■Cross■Ethernet■Cable
2.■Preparing■for■the■Installation■of■the■System■Software■of■Host■machine
1)■If■both■PC■and■the■machine■are■on,■turn■them■off.
2)■Connect■the■PC■and■the■machine■using■an■Ethernet■cable.
3)■Turn■on■the■PC.
4)■Start■up■the■machine■in■download■mode■(safe■mode).
3.■Selecting■the■System■Software
1)■Set■the■CD■containing■the■latest■system■software■in■the■PC■on■which■the■SST■is■used.
2)■Start■up■the■SST.
3)■Click■Register■Firmware.
4)■Select■the■drive■in■which■the■System■Software■CD■has■been■set,■and■click■search.
5)■Click■REGISTER.
6)■Click■OK.
4.■Downloading■the■System■Software
1)■Click■CONNECT.
2)■From■the■list■of■machine■series,■select■the■appropriate■model.
3)■Select■‘single’,■and■click■START.
4)■Execute■HDD■format.
5)■After■5■sec■from■when■the■power■of■the■host■machine■is■turned■OFF,■restart■the■host■
machine■in■download■mode■of■safe■mode.
6)■When■“download■mode”■is■displayed■on■the■control■panel,■click■simple■mode■start.
7)■Click■start■to■execute■download.
8)■Follow■the■instruction■on■the■screen■and■when■download■is■complete,■click■OK.
9)■Exit■SST.
10)■Check■the■versions■of■MN-CONT■and■LANG■etc■in■service■mode.
Checking■the■Security■Version■(Only■when■installing■
HDD■Data■Encryption■&■Mirroring■Kit)
1)■Press■the■Counter■key■(123■key)■on■the■control■panel.
2)■Press■the■[Check■Device■Configuration]■key■appearing■on■the■control■panel.
3)■Make■sure■that■'2.00'■or■'2.01'■is■displayed■in■‘Canon■MFP■Security■Chip’■as■version■
information■of■the■security■chip.
When■several■Encryption■Boards■are■installed,■multiple■version■information■is■displayed.
CAUTION:
The■user■will■be■able■to■make■sure■that■the■encryption■board■fitted■with■a■security■chip■
of■the■correct■version■with■CC■authentication■is■functioning■normally■by■referring■to■the■
version■information■indicated■for■‘Canon■MFP■Security■Chip’.
Checking■the■Security■Mark■(Only■when■installing■HDD■
Data■Encryption■&■Mirroring■Kit)
The■user■may■check■the■security■mark,■appearing■on■the■control■panel■when■using■the■Host■
machine■to■make■sure■that■an■appropriate■level■of■security■is■being■maintained.
The■mark■appears■when■the■machine■is■equipped■with■an■encryption■board■and■the■board■is■
operating■correctly.
The■Users■Guide■provides■the■following■description■in■connection■with■the■security■mark:
<Confirming■the■Security■Mark>
When■the■HDD■Data■Encryption■&■Mirroring■Kit■is■operating■normally,■a■security■mark(■
■)■
is■displayed■on■the■lower■left■corner■of■a■panel■screen.