Canon IMAGERUNNER ADVANCE C5030, Getting Started, Page: 229 / 252

16
Appendix
Reports
16-5
DESTINATION ADDRESS
The address of the recipient is printed.
DESTINATION ID
The name of the recipient is printed.
JOB NO .
The four digit number, that is automatically assigned when the document is accepted for sending, is printed.
MODE
The type and mode of transmission are printed.
Transmission type:
Send (TX)
Mode of transmission: FTP, SMB, WebDAV, Mail Box (BOX), I-Fax (I-FAX), E-mail (MAIL), Fax (FAX)
PGS .
The number of pages that were sent is printed.
If a field exceeds its display capacity, only those characters that fit in the display are printed.
Send TX Report/Send Error TX Report
The Send TX Report is a printed report that informs you of whether a send job has been successfully delivered to its
destination. A Send TX Report can be set to print automatically after each job is sent, or only when there are transmission
errors. (See e-Manual > Settings/Registration.)
A list of fax, e-mail, I-fax, file server, and Mail Box transmissions is printed on the Send TX Report. Even if [Report with TX Image] is set to
'On', the contents of the sent document are not printed on the report if the document was sent using the Encrypted PDF mode.
You can also print a Send TX Report with an image of the sent original attached to it. (See e-Manual > Settings/Registration.)
JOB NO .
The four digit number, that is automatically assigned when the document is accepted for sending, is printed.
DEPT . ID
If Department ID Management is set, the Department ID is printed.
ST . TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to transmit are printed.
PGS .
The number of pages that were sent is printed.
■
■
■
■
■
•
•
■
■
■
■