Canon IMAGERUNNER ADVANCE C5030, Getting Started, Page: 100 / 252

5
Settings Common to the Network Protocols
Interface Settings 5-10
2
On the Network screen, press [Ethernet Driver Settings] → specify the following .
If you want the machine to automatically determine the communication mode and Ethernet type:
<Auto Detect>: [On]
If you reconnect the network cable (for example, reconnect the cable to a different Ethernet hub) with the machine's main power
switch ON, the Auto Detect function will not work even if you set <Auto Detect> to [On]. Turn OFF the machine, wait at least 10
seconds, and then turn it ON. (Connect the cable with the machine's main power switch OFF.)
The machine automatically determines the Ethernet type. Press [On] unless you want to specify a particular Ethernet setting.
If you set <Auto Detect> to 'On', the machine will not enter a complete Sleep mode.
If you want to manually set the communication mode and Ethernet type for specifying a particular
Ethernet type setting:
<Auto Detect>: [Off].
Select the appropriate items for <Communication Mode> and <Ethernet Type>, according to the network environment you are
using.
To connect with 1000Base-T, select [Full Duplex] for <Communication Mode>.
If you select [10 Base-T] or [100 Base-TX] for <Ethernet Type>, the machine will not enter a complete Sleep mode.
●
☐
•
•
●
☐
•
•